|
|
|
|
|
|
|
|
|
|
|
|
|
WirelessGRID Indoor Subscriber Unit 23dBi antenna |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AI108-4958-SU includes:
Features include:- Will communicate with up to 2 other WirelessGRID bridges.
- Distance tested: Up to 2.5 miles in multipoint mode. (Depends on antenna used.
- Simple to use web configuration and management utility
- Antenna Alignment: Real-time RSSi (Signal to Noise) Signal Monitor for Antenna Alignment and Link Quality
- Real-time statistics: Monitor Bridge Status, Data Rate, Packet Error Rate (PER), RSSi (stats and graphing), and more...
- SecureRF Security: Proprietary WirelessGRID Protocol, WirelessGRID & ACL MAC address link authentication. AES data encryption
- Channel Size: 40 or 20 MHz wide
- Non-overlapping Channels: 5.25-5.35 GHz (FCC, IC, Mexico, Poland) 4 x 20 MHz, 2 x 40 MHz
- Non-overlapping Channels: 5.47-5.72 GHz (ETSI, FCC, ITU) with TPC and DFS. 11 x 20 MHz
- Non-overlapping Channels: 5.725-5.850 GHz (UNII & ISM Bands-ETSI, FCC, MII, RA, Mexico) 5 x 20 MHz, 2 x 40 MHz
- Modes: 108, 96, 72, 54, 48, 36, 24, 18, 12, 9, 6 Mbps or Auto
- Radio Transmit Output Power: 0 and 21 dBm. Supports Transmit Power Control and Dynamic Frequency Selection where required
- Receive Sensitivity: between -71 to -85 dBm depending on mode of operation
- Modulation: 64QAM, 16QAM, QPSK, and BPSK modulation
- VPN Support: for Ethernet tagged frames (802.1q, 802.1p, and VPN)
- AC Power Supply (100-120 AC, 50-60Hz input. 5 Volt, 2 Amp output, Bridge Connector: 2.1mm Coax - Center pin positive)
- LED diagnostics: For power, network link/activity, radio link/activity monitoring
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|