|
|
|
|
|
|
|
|
|
|
|
|
|
EAP700-MA Wall Jack Access Point w/ adaptor and mounting kit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 4ipnet EAP700 Wall Jack Access Point is an in/on-the-wall as well as a ceiling-mounted Wi-Fi IEEE 802.11b/g AP, designed to blend with any office or home interior architecture or furnishings effortlessly.The compact EAP700 in a small form factor lays snug in a standard wall outlet box, and hides the wall cutout with its faceplate. Its front panel features LED status indicators and a RJ45 wall jack. It has the interfaces to serve both wireless and wired LAN access. The simplistic yet chic design of EAP700 allows it to blend into a working or a living environment practically and elegantly. Bridging multiple EAP700s is at the touch of a button with 4ipWES (Press-n-Connect) technology. It enables a quick and automatic WDS Easy Setup by pressing the WES button on EAP700. Extending wireless network coverage is a breeze.By utilizing PoE, EAP700 comes with an advantage of running fewer cables in the duct. The Power over Ethernet (PoE) LAN port on the EAP700 serves as the power feed as well as the wired network feed. Optionally, it can also be powered via an AC adapter when PoE switch is not available. Standalone, EAP700 is an easy-to-install and cost-effective solution for most of indoor wireless deployments, including hotel rooms, apartments, offices, classrooms, libraries, private homes, public kiosks, etc. When working under one of 4ipnet Controllers, the combined network turns into an intelligent building solution, a managed internet service, or a Wi-Fi hotspot network of various scales. Multi-pack is available at lower cost to contractors/builders for larger deployments.
WIRELESS RADIO |
Frequency band |
2.4 GHz |
Wireless architecture |
- AP mode
- Repeater mode (WDS/Universal Repeater)
|
Modulation |
- 802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
- 802.11b: DSSS (CCK, DBPK, DQPSK)
|
Channels |
- USA (Channel 1~11)
- Japan (Channel 1~14)
- Europe (Channel 1~13)
|
Data rate with auto fallback |
- 802.11b: 1~11 Mbps
- 802.11g: 6~108 Mbps
|
Transmit Power |
- 802.11b: Up to 25dBm EIRP
- 802.11g: Up to 25dBm EIRP
- 802.11n: Up to 23dBm EIRP
|
Antenna |
Built-in chip antenna |
Receiver Sensitivity |
- 802.11b: 11Mbps@-89dBm
- 802.11g: 54Mbps@-74dBm
|
RF output power |
- US version: 500mW EIRP
- EU version: 100mW EIRP
|
OTHER |
QoS & WMM |
- DiffServ/TOS
- IEEE 802.1p/COS
- IEEE 802.1Q Tag VLAN priority control
- IEEE 802.11e WMM
|
Handover & Roaming |
- IEEE 802.11f IAPP
- IEEE 802.11i pre-auth (PMKSA cache)
- L2 Roaming
|
Security |
- WEP (64/128/152 bits)
- EAP-TLS + Dynamic WEP
- EAP-TTLS + Dynamic WEP
- PEAP/MS-PEAP + Dynamic WEP
- WPA (PSK + TKIP)
- WPA (802.1X certification + TKIP)
- 802.11i WPA2 (PSK + CCMP/AES)
- 802.11i WPA2 (802.1X certification + CCMP/AES)
- TKIP/CCMP/AES key's refreshing period
- Hidden ESSID support
- MAC Address filtering (MAC ACL)
- MAC authentication with RADIUS servers
- Maximum number of registered RADIUS servers: 2
|
System Management |
- Web-based administration
- SNMP v1/v2c
- Provides Event Log
- Syslog information support
- Statistics
- Configuration backup and restore
- One-button-click to restore factory default setting
- Firmware upgrade utility
- Capable of performing RADIUS Accounting and Accounting Update
- 4ipWES (Press-n-Connect) button for WDS Easy Setup
|
Built-in Servers & Client Interfaces to Other Services |
- DHCP client
- DNS client
- Syslog client
- RADIUS client
- SNMP v1/v2c client
|
Wireless Signal Management |
- Number of ESSIDs (Virtual APs): 8
- Number of associated clients per VAP: 32
- Setting for maximum number of associated clients
- Network policy based on ESSID
|
Certifications |
FCC, CE, RoHS compliant |
HARDWARE SPECIFICATIONS |
LAN Port |
2 × 10/100 Base-T Ethernet with PoE |
PoE Port |
1 × 10/100 Base-T Ethernet |
LED Indicators |
1 × Power, 1 × LAN, 1 × WLAN |
PHYSICAL AND POWER SPECIFICATIONS |
Form factor |
In-Wall type |
Power |
- DC Output: 12V, 1.5A
- 802.3af PoE
|
Dimensions (W x D x H) |
- Center unit: 1.88" x 3.07" x 3.07" (48mm x 78 mm x 78 mm)
- Faceplate: 2.95" x 4.72" x 0.35" (75mm x 120 mm x 9 mm)
|
Weight |
0.42 lbs (0.19 kg) |
ENVIRONMENT |
Operation Temperature |
-20 ~ 60 °C (-4 ~ 140 °F) |
Storage Temperature |
-40 ~ 85 °C (-40 ~ 185 °F) |
Operation Humidity |
10% ~ 80% (Non-condensing) |
Storage Humidity |
5% ~ 90% (Non-condensing) |
PACKAGE CONTENTS |
- 4ipnet EAP700 x 1
- CD-ROM (with User's Manual and QIG) x 1
- Quick Installation Guide (QIG) x 1
- Faceplate set (2pcs) x 1
- Screw pack x 1
|
|
** Specifications subject to change without notice** |
Minimum qty: 10 Part#: EAP700-MA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|