|
|
 |
 |
 |
 |
 |
 |
|
|
|
 |
|
|
BridgeWave FlexPort µWave |
|
|
 |
|
|
|
 |
 |
 |
|
 |
 |
|
|
 |
 |
|
 |
 |
 |
 |
|
 |
 |
|
|
 |
|
BridgeWave’s FlexPort® family of high-capacity wireless solutions are well-positioned to fulfill a critical role for emerging 4G/WiMAX/LTE deployments worldwide.
FlexPort ® µWave in the 18 GHz and 23 GHz microwave radio systems have been designed specifically to meet the requirements of operators, carriers, and service providers requiring full-rate gigabit connectivity in a single, compact, all-outdoor enclosure. The FlexPort® µWave accomplish this through an innovative approach in aggregating multiple RF channels without the need for additional hardware as with other lower licensed frequency band products. This helps ease installation and maintenance costs on the network by offering only one device to install and manage, providing the user with a highly-reliable, fully integrated backhaul solution.
Carrier-class Platform for 4G Migration
FlexPort was designed with the requirements of mobile operators migrating to 4G networks in mind. Several key capabilities critical for the successful implementations of robust 4G network backhaul are included:
- TDM + IP CONNECTIVITY – FlexPort80 delivers simultaneous TDM + IP connectivity, all natively, allowing operators to utilize a single, future-proofed solution for today's TDM-based networks while migrating to next generation IP based transmission at their own pace.
- EASE OF NETWORK PLANNING – FlexPort80 provides frequency agility not seen in any other 80 GHz product. As cell density increases, the ability to tune anywhere in the 80 GHz band greatly simplifies network planning.
- EFFICIENT SPECTRUM USE – FlexPort80 utilizes QPSK modulation, providing improved spectral use compared to other 80 GHz solutions. This translates to lower licensing costs as well as better frequency reuse/ conservation of the 80 GHz spectrum.
- MULTI-CHANNEL RF AGGREGATION – FlexPort µWave provides full-rate gigabit Ethernet transport by simultaneously transmitting over multiple RF channels in a single all-outdoor enclosure.
- CARRIER ETHERNET SERVICES - With its built-in low-latency gigabit Ethernet layer-2 switch, FlexPort provides Quality of Service, VLAN, and support for Jumbo packets (up to 10,000) bytes.
- CARRIER ETHERNET MANAGEMENT – FlexPort provides advanced carrier Ethernet (OAM and CFM) management capabilities per IEEE 802.3ah (link OAM), 802.1ag (configuration fault management), Y.1731 (performance monitoring).
18 GHz and 23 GHz Full-Rate Gigabit Capacity Wireless Links for high bandwidth applications
The FlexPort® family of high capacity millimeter wave radios offers carriers, service providers, government and enterprise users the ultimate flexibility in an access and aggregation/backhaul solution for today’s networks.
The FP18 and FP23 microwave radio systems have been designed specifically to meet the requirements of operators, carriers, and service providers requiring full-rate gigabit connectivity in a single, compact, all-outdoor enclosure. FP18 and FP23 accomplish this through an innovative approach in aggregating multiple RF channels without the need for additional hardware as with other lower licensed frequency band products. This helps ease installation and maintenance costs on the network by offering only one device to install and manage, providing the user with a highly-reliable, fully integrated backhaul solution.
Product highlights:
- Industry First: Wire-Speed GigE in a single ODU without compression
- Ultra-high capacity microwave radio system optimized for next generation mobile backhaul
- Operates in the microwave frequency Bands: 18 & 23 GHz initially
- 40 , 50 , 80 , 100 , 150 and 160 MHz channel width configuration options
- Full line rate GigE using a single ODU
- Capacity upgrade via SW license file
- Native Ethernet support
- Carrier Grade Network management
- All ODU design – Small Form Factor
- Leverages BW’s experience in high capacity systems development
FEATURES
Performance:
- Full-rate, full-duplex gigabit Ethernet transmission
- Internal 5-port gigabit Ethernet switch
- Low latency for fiber-equivalent performance
- Innovative RF channel aggregation yields true GigE throughput
- QPSK — 2560AM modem design allows flexibility in link planning
- Optional FIPS-Certified 256-bit AES Encryption
Ease of Use:
- All-outdoor design
- Field-pluggable SFPs available with multi-mode, single mode, or copper interlaces
- Web based & SNMP management
Proven Reliability:
- Based on proven design - thousands of full-rate GigE millimeter wave terminals installed
- Rigorous HALT/HASS testing
- Up to 99.999% carrier-grade availability
Simple GigE Implementation:
- Less hardware to install than other microwave systems
- Lower dollar per megabit total cost of ownership
- Smaller & lighter than solutions requiring two ODUs and combiners
- No tower climb for upgrades
| FP18 & FP24 SPECIFICATIONS |
| Frequency Range |
17.7— 19.7 GHz |
21.2 — 23.6 GHz |
T/R Spacing: 1,560 MHz |
T/R Spacing: 1,200 MHz |
| Data Rates & Modulation* |
40/50/80/100/150 MHz RF Channel Bandwidth: |
QPSK:62/83/1 31/166/250 |
64QAM: 188/250/403/500/750 |
16QAM: 125/166/262/333/500 |
128QAM: 219/291/473/583/875 |
32QAM: 156/208/328/417/625 |
256QAM: 250/333/544/667/1000 |
Transmitter Power Output |
QPSK: +25 dBm |
64QAM: +21 dBm |
16QAM:+24 dBm |
128QAM: +19 dBm |
32QAM: +23 dBm |
256QAM: +17 dBm |
Receiver Sensitivity for 1x10-6 B.E.R.* |
40/50/80/100/150 MHz RF Channel Bandwidth: |
QPSK: -80/-791-77/-76/-74 dBm |
640AM: -68I-67/-65/-64/62 dBm |
16QAM: -74/-73/-71 1-701-68 dBm |
1280AM: -65/-64/-62/-61/-59 dBrn |
320AM: -71/-70/-68/-67/-65 dBm |
256QAM: -621-611-591-581-56 dBm |
Ethernet Interface |
- Fast Ethernet & Gigabit Ethernet per IEEE 802.3. One RJ-45 (CAT5e) 10/1 00/1 000 Base-T supports line rate speeds up to gigabit Ethernet
- Up to 4 field pluggable SFPs supporting multimode (-SX), single mode (-L)() or copper (-T) interlaces
|
Latency |
|
Networking |
- Quality of Service per 802.1 p, VLAN Support: up to 4092 VLANs
- Scheduling: 8 queues allowing user configurable Strict Priority or Shaped Deficit Weighted Round Robin (SDWRR)
- Maximum Ethernet frame length: supports Jumbo packets up to 10,000 bytes
- Per-port Rate Limiting
|
| Management |
- Web-based (HTTP) embedded management agent, HTTPS secure management available
- SNMP Support: MIB-Il And BridgeWave enterprise MIB
- SysLog (RFC 3164, RFC 3195) event support, RADUIS client support
- Ethernet OAM per 802.3ah (Link OAM), 802.lag (Configuration Fault Management), Y.1731 (Performance Monitoring)
|
Security |
- Option: FIPS certified 256-bit AES Encryption (export controlled)
|
| PHYSICAL AND POWER SPECIFICATIONS |
| Power |
-48 VDC input, -37.5v to -70v range, 60 watts power consumption. Supports redundant “A” and “B” power feeds |
| Dimensions |
11.9” dia x 7.25” d (30.2 cm x 184 cm) |
| Weight |
14 lbs (6.3 kg) |
| ENVIRONMENT |
| Operating Temperature |
-33°C to +55°C (-27°F to +131°F) per EN 300 019 Class 4.1 |
Operating Altitude |
4,500 m (14,764 ft) |
Water Ingress |
IP66 |
| Storage Humidity |
5% ~ 95% (Non-condensing) |
| REGULATORY & SAFETY |
- Safety: UL Listed, meets FCC 1.3.10 general population RF MPE limits
- Certifications: RF Certifications, U.S. FCC Part 101
|
|
|
*
Note:
100 MHz refers to 2x50 MHz RF channels
150 MHZ refers to 3x50 MHz RF channels |
Part#: FP-uwave
|
|
|
|
|
|
 |
 |
|
 |
 |
 |
 |
|
 |
 |
|
|
|
|
